The platform that brings together energy, technical assets and costs in a single decision system. It turns consumption data (electricity, water, gas, thermal energy, environmental parameters) into normalized indicators, contextual alerts, intervention tickets in MOBIUS UEAM and verifiable reports.
Each energy deviation is correlated with the asset, the process and the operating schedule, without replacing certified local protections or automation.
MOBIUS OEAM is not just a monitoring system. It is the platform through which energy information becomes technical, financial and managerial action: it links the consumption of electricity, water, gas and thermal energy to asset condition, operating schedule, maintenance and costs.
The fusion of ISO 50001 (energy management) and ISO 55001 (asset management) turns any increased consumption for the same output into an early diagnostic tool for the wear of a pump, blower, boiler or HVAC installation.
Implementation can start with an operational core (MVP / pilot project) and be extended gradually, without dependence on a single equipment manufacturer.
Smart meters, network analyzers (EFFI-100 / PM5330), IoT sensors (CO₂, temperature, pressure), programmable logic controllers (PLCs), SCADA, BMS and ERP via Modbus TCP/RTU, BACnet, OPC UA, IEC 61850 and MQTT.
Executive and technical dashboards, synoptic views by building/level/station, continuously updated performance indicators, 24h load curves, multi-site comparison and mobile access.
Fixed and dynamic thresholds, persistence rules, elimination of false alerts, classification on 4 levels (Information, Warning, Critical, Emergency) and automatic ticket generation in MOBIUS UEAM.
Energy balance by level, a reference profile (baseline) adjusted for operating regime and seasonality, specific consumption (kWh/m³, kWh/tonne, kWh/m², kWh/pupil, kWh/bed) and power quality (EN 50160, THD).
Peak shaving, shifting cyclical loads (filter washing, sludge presses, heating) to low-tariff periods and battery storage — exclusively with local approvals and interlocks.
Automatic reports for ISO 50001, ANRE, energy audits (Law 121/2014), carbon footprint / CSRD, cost centers, sub-billing (internal invoicing) and PDF / Excel / CSV exports.
Consumption forecasting (1–72 hours), early anomaly detection, energy signatures of critical equipment (SoH, RUL) and human-reviewed predictive maintenance recommendations.
A unified inventory with QR/NFC labels, GIS for networks and roads, management of intervention teams, spare parts, contracts and a complete audit history for each asset.
MOBIUS OEAM makes use of the existing infrastructure and can be complemented in the field with the hardware layer EFFI-100 / effiPower for advanced measurement of electrical energy and with the automatic seismic protection devices DASS (M95 XL).
It takes information from the main distribution boards (MDB), floor boards and the feeders of critical consumers (pumps, blowers, chillers, HVAC units) via RS485 Modbus RTU and 4–20 mA inputs, with a local buffer (store & forward) when communication is interrupted.
An automatic interception device activated by seismic loading (triaxial accelerometer 1–10 Hz, 128-point FFT analysis, threshold 0.1 g / 0.0875 g, response < 5 seconds). The safety action is local and immediate, while MOBIUS OEAM / UEAM takes over the status, notifies teams and opens inspection tickets.
Consult and download below the detailed technical presentations for the four major fields of application where MOBIUS OEAM and MOBIUS UEAM operate in an integrated way.
Unifies energy data, process parameters (flow, pressure, level, turbidity, dissolved oxygen DO, NH₄, NO₃) and asset history across the entire water and wastewater chain: abstraction, transmission, drinking water treatment (DWTP), storage/distribution (DMA, boosters), sewerage (wastewater pumping stations) and wastewater treatment (WWTP).
In a hospital, energy is what keeps operating rooms, ICUs, the emergency department, the medical gas chain, sterilization and sterile air conditioning running. The platform organizes data along the hierarchy Hospital → Building → Level (Technical basement + Levels 1–5) → System → Asset → Measurement point.
Brings together in a single picture the consumption, indoor environmental quality, safety and equipment inventory for the entire school campus: the main building (technical basement, ground floor, upper floors with classrooms and laboratories), the gym and sports grounds, technical surveillance and perimeter lighting.
Gives County Council management a common platform for consumption, assets, buildings, costs and interventions across the entire county portfolio, while keeping operational responsibility at the level of each subordinate institution.
The architecture separates the field, local collection (Edge), modeling, representation and decision — ensuring local continuity even when communication is temporarily interrupted.
Meters, EFFI-100 analyzers, CO₂/process sensors, PLC/SCADA
Timestamping, plausibility validation and a local buffer without duplicates
Association with the station, level, production line, schedule and tariff
Synoptic view by level, GIS map, 24h profile and energy balance
Comparison with the dynamic baseline, diagnostics and criticality triage
Team assignment, field intervention, measurements and confirmation
When a pump, blower or circuit consumes more than the reference profile under the same operating conditions, the rules engine evaluates persistence and severity, then automatically opens a ticket in MOBIUS UEAM for the competent team (Electrical, Mechanical, Hydraulic, Gas, HVAC or IT).
The signal exceeds the fixed threshold or the dynamic reference profile; missing values or sensor jumps are removed.
The building/station, level, asset, schedule and severity level (Information, Warning, Critical, Emergency) are attached.
Automatic generation with a safety procedure, required competences, SLA deadline and escalation rule.
The team takes the task on mobile/web, isolates safely, fixes the cause and attaches measurements and photos.
The platform checks that consumption has returned to the baseline and records the savings and traceability for audit.
The difference between simply reading meters and integrated operational management of energy and assets.
| Dimension | Before (Monthly bills, isolated SCADA, Excel) | With MOBIUS OEAM + MOBIUS UEAM |
|---|---|---|
| Consumption visibility | Total values read from the bill at the end of the month; impossible to separate consumption by floor, ward, production line or critical asset. | Real-time balance along the hierarchy (company → building/station → level/line → board → asset) and specific indicators (kWh/m³, kWh/bed, kWh/pupil, kWh/tonne). |
| The energy – asset condition relationship | Increased consumption by a pump or blower goes unnoticed until a mechanical or electrical failure. | Energy as a diagnostic tool: deviation from the baseline gives early warning of wear, clogging or incorrect settings. |
| Alarm management | Numerous local alarms, unprioritized or lost without a trace; no link with maintenance teams. | A single Alert → UEAM Ticket flow: triage by criticality, assignment to a specialized team, SLA deadline and post-intervention confirmation. |
| Data continuity | Network outages create permanent gaps in the measurement history. | Local Edge / EFFI-100 unit with buffer: local storage with timestamps and automatic resynchronization without duplicates. |
| Safety & Seismic Protection | Uncorrelated systems; after an incident there is no centralized record of the checks needed before returning to service. | DASS M95 XL integration: certified local transition to a safe state + automatic tickets in UEAM for tightness/circuit checks. |
| Energy Audit & ISO 50001 | Laborious manual collection for ANRE, ISO 50001 or CSRD reporting; estimated savings with no measured proof. | Normalized baseline and automatic reports, supported by certified energy auditors (Law 121/2014) and a 100% audit trail. |
Select the options specific to your organization to automatically pre-fill the technical assessment request and the pilot project proposal.
No. The platform and the EFFI-100 equipment complement existing SCADA, BMS and automation without replacing them. Electrical protections, the fire alarm panel, the gas detector and the legal emergency procedures remain the local command authority.
The local gateway (Edge / EFFI-100 unit) validates and timestamps the data and temporarily keeps it in the local buffer; when the connection is restored, it automatically and securely retransmits it to the platform, with no losses and no duplicate records.
Savings are not based on generic promises; they are established after measuring a reference period (baseline), normalized for volume, flow, outdoor temperature, occupancy and operating regime, and then verified through the pilot project.
Yes. Beyond the software platform and the EFFI-100 hardware component, the MOBIUS team offers energy audit services carried out by ANRE-certified energy auditors and assistance in defining EnPI indicators according to ISO 50001.
Send your request directly from this page — with no need for an email client in the browser and no additional validation steps. The MOBIUS technical team will analyze the proposed scope and contact you to arrange a technical visit or a demo.
Direct and secure transmission to the MOBIUS Software server.
All documents are available free of charge in PDF format for technical analysis within your team.